WizardProg Mobile

The "WizardProg Mobile" (professional version application is "WizardProg Expert") application software designed to manage the programming operation for the universal portable USB-programmer TL866A/CS and other programmer models which fully compatible with it. This system is used to program a wide range of E(E)PROM chips, microcontrollers internal EEPROM, testing SRAM chips and logic chips.

The application allows you to achieve a new level of mobility and efficiency when using the programmer TL866, which is used widely to repair and adjustment:

· automotive computers, computer-unit and radio;

· personal computers;

· any other modern electronic equipment.

The "WizardProg Mobile" system is used by service technicians of electronics, amateur radio operators and developers of modern electronic devices for the purpose of:

· repair and restore the microelectronic device and firmware;

· promptly update the firmware of microelectronic devices;

· assist in the embedded electronics construction and setting up the microcontroller units;

· replicate numerous useful designs using advanced electronic components.

Main characteristics and features of the "WizardProg Mobile" microelectronic programming system are:

· Fast and reliable programming, in most cases with significantly better speed than the similar systems.

· The programmer's low power consumption when powered by USB (OTG)-cable from the mobile device battery.

· Support for a wide range of integrated circuits (ICs): the memory of a large capacity up to 128Mbit (EPROM, FLASH, EEPROM I2C/3-wire/SPI), microcontrollers PIC, Atmel-AVR, MCS-51 based SST, SyncMOS, Winbond. PLD chips, GAL.

TL866 programmer does not need an external power supply and it operates using the power sources of a tablet or mobile phone which is connected to via USB interface. Physical linking to a mobile device is provided with a USB cable fully supporting OTG (On-The-Go) protocol.

Important note! The target control tablet or mobile phone must have a fully implemented hardware support of OTG access too!

Currently "WizardProg Mobile" mobile application is completely autonomous in operation, does not need a permanent connection to the Internet, allowing you to use it even without access to communication networks.

Both of programmer's models TL866CS and TL866A(ICSP) are fully supported. The modern version of the TL866II Plus programmer currently is not supported by the "WizardProg Mobile" system!

Device list for the current application version: http://www.wizardprog.com/wp/dblist/recent_version_chiplist.htm

“WizardProg Mobile”（专业版应用程序是“WizardProg Expert”）应用程序软件，旨在管理通用便携式USB编程器TL866A / CS以及与其完全兼容的其他编程器模型的编程操作。该系统用于编程各种E（E）PROM芯片，微控制器内部EEPROM，测试SRAM芯片和逻辑芯片。

该应用程序允许您在使用编程器TL866时实现更高的移动性和效率，该程序器广泛用于修复和调整：

·汽车电脑，计算机单元和收音机;

·个人电脑;

·任何其他现代电子设备。

“WizardProg Mobile”系统被电子，业余无线电操作员和现代电子设备开发人员的服务技术人员用于以下目的：

·修复和恢复微电子器件和固件;

·及时更新微电子设备的固件;

·协助嵌入式电子设备构建和设置微控制器单元;

·使用先进的电子元件复制许多有用的设计。

“WizardProg Mobile”微电子编程系统的主要特点和特点是：

·快速可靠的编程，在大多数情况下，速度明显优于同类系统。

·程序员通过USB（OTG）供电时的低功耗 - 可通过移动设备电池进行供电。

·支持各种集成电路（IC）：高达128Mbit的大容量存储器（EPROM，FLASH，EEPROM I2C / 3线/ SPI），微控制器PIC，Atmel-AVR，基于MCS-51的SST， SyncMOS，华邦。 PLD芯片，GAL。

TL866编程器不需要外部电源，它使用通过USB接口连接的平板电脑或移动电话的电源进行操作。物理链接到移动设备的USB电缆完全支持OTG（On-The-Go）协议。

重要的提示！目标控制平板电脑或手机必须完全实现OTG访问的硬件支持！

目前“WizardProg Mobile”移动应用程序完全自主运行，不需要永久连接到Internet，即使无法访问通信网络也可以使用它。

程序员的TL866CS和TL866A（ICSP）都完全支持。 “WizardProg Mobile”系统目前不支持现代版TL866II Plus程序员！

当前应用程序版本的设备列表：http：//www.wizardprog.com/wp/dblist/recent_version_chiplist.htm